A countertop oven with 300° maximum temperature for baking polymer clays and other craft products. This handy countertop oven is perfect for warming/baking polymer clays or any craft product requiring heat up to 300°F (149°C). It includes a 30-minute timer to prevent over-baking and instruction book. The Polymer Clay & Craft Oven is a much more efficient way to bake polymer clay than the energy used by a home oven! Photo shows oven with Professional Bead Baking Rack and Beads. These items are not included. Internal dimensions are 11" W x 5" H x 7.5" D. with a capacity is 540 cu. in. Operates on standard household current. IMPORTANT: DO NOT put craft items in a cold oven. Always preheat oven. Polymer clay as well as other craft products that require heat, cure best when baked in a properly preheated oven. To preheat, place an oven thermometer inside oven, turn the temperature dial to 265 degrees and the timer dial to 20 MINUTES. When the bell rings the oven should have reached 265 degrees. Check the oven thermometer to verify that the oven is at the correct temperature. When the correct temperature is reached, place your craft project in the oven for baking.

Terra Cotta Air Dry Clay, 10 lb., is an all-purpose air dry clay to use for sculpting, hand modeling, or throwing on a potter s wheel. Once pieces are finished, air dry evenly and slowly on all sides. Pieces will dry hard, but must be handled carefully to avoid breakage. Pieces can be decorated with paint, and sealed with shellac for added strength and to waterproof. This clay can also be fired to cone 04 for hardness/permanence and to glaze.

Terra Cotta Air Dry Clay is an all-purpose air dry clay to use for sculpting, hand modeling, or throwing on a potter s wheel. Once pieces are finished, air dry evenly and slowly on all sides. Pieces will dry hard, but must be handled carefully to avoid breakage. Pieces can be decorated with paint, and sealed with shellac for added strength and to waterproof. This clay can also be fired to cone 04 for hardness/permanence and to glaze. Each box includes 10 lbs of clay. Sold as 2 boxes for a total of 20 lbs.

White Air Dry Clay, 10 lb., is an all-purpose air dry clay to use for sculpting, hand modeling, or throwing on a potter s wheel. Once pieces are finished, air dry evenly and slowly on all sides. Pieces will dry hard, but must be handled carefully to avoid breakage. Pieces can be decorated with paint, and sealed with shellac for added strength and to waterproof. This clay can also be fired to cone 04 for hardness/permanence and to glaze.

White Air Dry Clay is an all-purpose air dry clay to use for sculpting, hand modeling, or throwing on a potter s wheel. Once pieces are finished, air dry evenly and slowly on all sides. Pieces will dry hard, but must be handled carefully to avoid breakage. Pieces can be decorated with paint, and sealed with shellac for added strength and to waterproof. This clay can also be fired to cone 04 for hardness/permanence and to glaze. Each box includes 10 lbs of clay. Sold as 2 boxes for a total of 20 lbs.

Gray Air Dry Clay, 10 lb., is an all-purpose air dry clay to use for sculpting, hand modeling, or throwing on a potter s wheel. Once pieces are finished, air dry evenly and slowly on all sides. Pieces will dry hard, but must be handled carefully to avoid breakage. Pieces can be decorated with paint, and sealed with shellac for added strength and to waterproof. This clay can also be fired to cone 04 for hardness/permanence and to glaze.

Gray Air Dry Clay is an all-purpose air dry clay to use for sculpting, hand modeling, or throwing on a potter s wheel. Once pieces are finished, air dry evenly and slowly on all sides. Pieces will dry hard, but must be handled carefully to avoid breakage. Pieces can be decorated with paint, and sealed with shellac for added strength and to waterproof. This clay can also be fired to cone 04 for hardness/permanence and to glaze. Each box includes 10 lbs of clay. Sold as 2 boxes for a total of 20 lbs.

Our inexpensive all-purpose air dry clay is perfect to sculpt, hand model, or throw on a potter s wheel. Air dry your finished pieces slowly and evenly on all sides. Decorate with paint. Seal with shellac for strength and to waterproof. This clay can also be fired to cone 04 for hardness/permanence and to glaze. Includes 25 lbs. of gray air dry clay.

Our inexpensive all-purpose air dry clay is perfect to sculpt, hand model, or throw on a potter s wheel. Air dry your finished pieces slowly and evenly on all sides. Decorate with paint. Seal with shellac for strength and to waterproof. This clay can also be fired to cone 04 for hardness/permanence and to glaze. Includes 25 lbs. of white air dry clay.

Our inexpensive all-purpose air dry clay is perfect to sculpt, hand model, or throw on a potter s wheel. Air dry your finished pieces slowly and evenly on all sides. Decorate with paint. Seal with shellac for strength and to waterproof. This clay can also be fired to cone 04 for hardness/permanence and to glaze. Includes 25 lbs. of Terra Cotta air dry clay.

This gray, self-hardening modeling clay is prepared in moist form, ready to use for all methods of modeling, including wheel throwing and sculpting. When completely dry, finished pieces are durable but not waterproof. Knead Marblex™ to increase plasticity before modeling. Keep unused clay in a plastic bag or wrapped in damp cloth to prevent drying out. 5lb box.

Our premium quality pale white self-hardening clay is formulated for handbuilding, wheelthrowing and sculpture techniques. Knead Stonex to increase plasticity before modeling. Moist, ready to use. Pieces dry hard and durable, but not waterproof. Can be painted. Includes 5 lbs.

Our premium quality pale white self-hardening clay is formulated for handbuilding, wheelthrowing and sculpture techniques. Knead Stonex to increase plasticity before modeling. Moist, ready to use. Pieces dry hard and durable, but not waterproof. Can be painted. Includes 25 lbs.

This gray, self-hardening modeling clay is prepared in moist form, ready to use for all methods of modeling, including wheel throwing and sculpting. When completely dry, finished pieces are durable but not waterproof. Knead Marblex™ to increase plasticity before modeling. Keep unused clay in a plastic bag or wrapped in damp cloth to prevent drying out. It will shrink during drying, so it is best to hollow out bulky sculptures or wrap a slab of clay around a loose crumpled paper armature before modeling. Allow the finished piece to dry slowly and evenly on all sides at room temperature and away from heat until hard. When piece is completely dry, decorate with AMACO® Rub n Buff®, school paints, temperas, acrylics or liquid crayons. After decorating, it is a good idea to coat with shellac or varnish to seal it and make it water resistant. 25lb box.

Our rich terra cotta premium quality self-hardening clay is formulated for handbuilding, sculpture and wheel throwing. Modeled objects with resemble Native American or Mexican Pottery with little or no decoration necessary. Moist, ready-to-use. Pieces dry hard and durable, but not waterproof. Can be painted. Keep unused clay in a plastic bag or wrapped in damp cloth to prevent drying out. It will shrink during drying, so it is best to hollow out bulky sculptures or wrap a slab of clay around a loose crumpled paper armature before modeling. Allow the finished piece to dry slowly and evenly on all sides at room temperature and away from heat until hard. When piece is completely dry, decorate with AMACO® Rub n Buff®, school paints, temperas, acrylics or liquid crayons. Includes 5 lbs.